4-22
11. Press the [ENT] key to open the DSC FREQ menu.
12M-INTL
GO TO ALL VIEW
***
Send message
***
CALL TYPE:
AREA:
PRIORITY
COM. TYPE
COM. FREQ
Individual
001234567
: Routine
: Telephone
: No infor
6 MHZ
8 MHZ
6
12 MHZ
4 MHZ
2 MHZ
DSC FREQ : TL
16 MHZ
18 MHZ
22 MHZ
25 MHZ
OTHER
MANUAL
Use to scroll
menu.
OTHER: Special, private channels.
MANUAL: For selection of frequency at
radiotelephone when there is "remote control
error."
12. Select DSC band and press the [ENT] key. Select DSC frequency and press the [ENT] key.
(See page 4-8 for details.) Your display should now look something like one below.
***
Send message
***
CALL TYPE : AREA CALL
AREA :
12˚N 123˚W ↓12˚ → 12˚
PRIORITY : ROUTINE
COM. TYPE : TELEPHONE
COM. FREQ :
2164.0 KHZ
DSC FREQ : 2177.0 KHZ
GO TO ALL VIEW
13. Press the [CALL] key to send the geographical area call (transmission time: about 7 sec.).
The display shows "Geographical area call in progress!" while the call is being sent.
AREA:
12˚N 123˚W ↓12˚ → 12˚
Geographical area
call in progress!
TIME TO GO : 7S
DSC FREQ :
2177.0 KHZ
TELEPHONE
2164.0 KHZ
ROUTINE
14. After the call is sent (timer counts down to zero), the DSC standby screen automatically
appears. You can now communicate with other party.
To Next Page
Loading...
