i
SAFETY INSTRUCTIONS
WARNING
Turn off the power at the switchboard
before beginning the installation.
Fire or electrical shock can result if the
power is left on.
Do not install the equipment where it
may get wet from rain or water splash.
Water in the equipment can result in fire,
electrical shock or damage the equipment.
Do not disassemble or modify the
equipment.
Fire, electrical shock or injury may result.
Connect the power cable to correct
terminals.
Improper connection may result in
electrical shock, fire or injury.
Use the proper power supply.
The rated voltage for this equipment is
24 VDC and 100-230 VAC. Use of a
different power supply can damage the
equipment.
CAUTION
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Attach grounding securely
to ship's body.
The grounding is required
to prevent electrical shock.
Standard
compass (m)
Steering
Microphone
VHF I/F unit
RAP
0.85
DCU
DRU
compass (m)
0.75
1.35
0.65
0.35
0.50
0.55
2.15
1.10
0.55
JB
1.051.65
Waterproof
Microphone
0.701.05
To Next Page
Loading...
