FUTABA 2HR - 2 HR-2.4 G Functions; Steering Trim; Throttle Trim

24
2HR Functions
Use this function to adjust the steering travel
of your model. If the model understeers
(push) while cornering, add steering by
turning C,W of the D/R button. When the
model oversteers (loose), take away steering
by turning C,C,W of the D/R button.
This function reverses the rotation direction
of the servo.
When the trim position deviates from
the center, the deviation will be on the
opposite side when the servo is reversed.
WARNING
Be sure that the steering linkage does
not bind or come in contact with any
suspension parts or arms. If unreasonable
force is applied to the servo, the servo may
be damaged and result in loss of control.
CAUTION
Adjust the Steering Trim after adjusting
the Steering Dual Rate Dial.
SteeringDualRates
ServoReversing
SteeringDual
Rates
ThrottleServo
Reversing
SteeringServo
Reversing
SteeringServo
Reversing
NOR:Normal
REV:Reverse
NOR:Normal
NOR:Normal
REV:Reverse
REV:Reverse
Changethedirectionofthesteering
reversingswitch.
Itoperatedasteeringtotheleft,
butacarturnedright.