Levels LV1, LV2, LV3 System-Wide Settings SYSTEM
DEFINITIONS:
•
SYSTEM Adjusts system-wide settings. Settings are not model specific.
•
LHT-MODE LCD backlighting mode
•
LHT-TIME LCD backlighting time period
•
CONTRAST LCD screen contrast
•
BUZ-TONE Buzzer tone
•
LED-MODE LED pilot lamp
•
DISPL-SEL Home screen display settings
•
KEY-ON Back-lights whenever a programming key is pressed. Length of
time is adjustable with LHT-TIME.
•
ACT Activated.
•
SRV-VIEW Servo display shown on home screen.
AVAILABLE FOR: System-wide only. Not channel or model specific.
ADJUSTABILITY:
•
LCD backlight: OFF, KEY-ON, ON (constantly).
•
Backlight time period: OFF, ACT (when KEY-ON is selected in LHT-MODE).
•
1-30 seconds, length of time can be adjusted for backlight to stay on when a button (key) is pressed.
•
Screen contrast: -10 to +10.
•
Buzzer tone adjustment: OFF, 0-100.
•
Pilot lamp color: OFF, LIGHT BLUE, PURPLE, WHITE, GREEN, ORANGE, YELLOW, BLUE.
•
Home screen display: FUTABA, SRV-VIEW, TIMER.
INTERACTION:
•
When LHT-MODE is set to KEY-ON, backlight comes on automatically if any programming button is pressed, and time
period is automatically made ACT (active).
•
Pilot lamp blinks when key functions, such as ABS and speed limiter, are active.
DESIRED END RESULT: Custom setup to best meet user’s needs and style.
CAUTION: Adjusting display so dark/bright that it cannot be read and then turning transmitter off may require factory
service to reset.
13
GOAL:
Change the home screen display from
Futaba to timer while radio is in LV1 setting.
(If set to more complex menus, scroll
through menus with Up button until SYSTEM
is displayed on screen.)
Where next?
STEPS:
Open and select menu 1.
Select SYSTEM.
Select DISP-SEL.
Change to TIMER.
Close.
INPUTS:
to SYSTEM.
Adjust backlight settings (repeat steps above but edit LHT.)
Adjust screen contrast (repeat steps above but adjust CONTRAST.)
Set up timer function (TIMER): See p. 30.
Reset system timer (from home screen for 1 second.)
To Next Page
Loading...
