FUTABA 3PK - Model Reset (MDL-RES); Resetting Model Data

Model Reset MDL-RES Levels LV2, LV3 Only
DEFINITION: Erases all data stored in a specific model memory.
AVAILABLE FOR: Current selected model only. Model # is displayed on screen.
INTERACTIONS:
•
Resets settings for the specific model memory currently in use without resetting any
settings for any other model in memory.
•
Model reset does not reset:
•
Modulation;
•
System settings;
•
Adjuster;
•
Lap listings;
•
User name;
•
Direct selection menu setup.
•
Model copy may be used prior to model reset to store a copy of this data, including to an optional CAMPac.
DESIRED END RESULT: Delete all existing programming from this model memory only.
CAUTIONS:
•
Deleted data can not be restored.
•
See list of functions NOT reset with a model reset under interactions.
32
GOAL:
Reset all data in Model #M3, while
already in model M3, and using the LV2
programming menus. (If using LV3, select
MDL-RES from menu 2.) (If using LV1, first
change level selection. See p. 12.)
Where Next?
STEPS:
Open and select menu 2.
Select MDL-RES.
Confirm your change.
If desired, return to LV1.
Close.
INPUTS:
for 1 second.
Name the model (MDL-NAME): See p. 15.
Copy the model (MDL-COPY): See p. 33.
Select a different model (MDL-SEL): See p. 14.
Select modulation (FM/PCM/HRS) (MOD-MODE): See p. 16. (Hint: remember to power
off and back on to begin transmitting in new modulation.)
Channel reversing (CH-REV): See p. 18.