EasyManua.ls Logo

FUTABA 3PK - Function Assignment (FUNC-DIAL, FUNC-SW); Assigning Functions to Dials and Trims; Assigning Functions to Switches

FUTABA 3PK
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Function Placement/controls FUNC-DIAL, FUNC-SW Levels LV2, LV3 Only
DEFINITIONS:
Function: Assigns functions to the 3 dials,
3 trimmers, and 3 switches on the radio.
Upper right on home screen displays
assignments to dials 1-3 and trims 1-3.
PS: Push button switch. Also called switch,
or SW. PS1 = SW1
ALT: Push button setting: push once
for on, push again for off.
NOR: Push button setting: hold for
on, release for off.
AVAILABLE FOR: Digital Dials 1, 2, 3 (DL 1-3); Switches 1-3 (PS 1-3), Digital Trims 1-3 (DT1-3). See transmitter
image (inside front cover) for locations of each dial, switch and trimmer.
ADJUSTABILITY:
Step amount can be adjusted for all dials/trimmers.
Trim functions (ST-TR, TH-TR): Increasing step decreases sensitivity of each click. Setting of 1 = 200 clicks for
entire trim range; setting of 10 = 20 clicks for entire trim range. Range = 1-7,10. Default = 1.
Channel 3: Adjustable to perform like a 2- or 3-position switch, as well as a range of sensitivity. Setting of
1 = 200 clicks; setting of 50 = 4 clicks. Range = 1, 2,5,10,20,50, 3PS (3-position switch), 2PS (2-position
switch). Default = 1.
All Other Functions: Step is the percent of the total value of that function changed by a single click.
Range = 1-7,10. Default = 1.
34
Available Functions
Dual rate; 2nd dual rate
ATL
Exponential (steer/forward/brake)
Speed (steer turn/return; throttle)
ABS (return/delay/cycle)
Acceleration (forward/brake)
Trim (steer/throttle)
Channel 3
Sub-trim (throttle/steer/ch 3)
Idle-up
Tilt mix (1>3/3>1)
Programmable mix (left/fwd/up;
right/brk/dwn) (mix 1/2)
Brake mixing (rate/delay/balance)
No function assigned
Auto-start
Throttle speed
ABS
Idle-up
2nd dual rate
Channel 3
Programmable mix 1/2
Lap start/reset
No function assigned
Abbreviation on setup screen
D/R; D/R2
ATL
EXP-S/EXP-F/EXP-B
SPDT/SPDR ; THSPD
ABSP/ABSD/CYCLE
ACC-F/ACC-B
ST-TR/TH-TR
CH3
SBT-1/SBT-2/SBT-3
IDLUP
TLT13/TLT31
PM1-A/PM1-B; PM2-A/PM2-B
BK-RT/BK-DL/BK-BL
OFF
AT-START
TH-SPEED
ABS
IDLE-UP
D/R 2nd
CH3
PROG MIX 1/PROG MIX 2
LAP START/LAP RESET
OFF
Abbreviation on home screen
D/R; D/R2
ATL
EXPS/EXPF/EXPB
SPDT/SPDR; THSPD
ABP; ABSD; CYCL
ACCF/ACCB
TRMS/TRMT
3CH
SBT1/SBT2/SBT3
IDLE
TL13/TL31
PM1A/PM1B; PM2A/PM2B
BKRT/BKDL/BKBL
OFF
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
ALL DIALS/TRIMMERS:
ALL SWITCHES:

Table of Contents

Related product manuals