FUTABA 3PK - Model Copy MDL-COPY

Levels LV2, LV3 Only Model Copy MDL-CPY
DEFINITION: Makes an exact copy of the current model, including its name.
AVAILABLE FOR: Current selected model only. Model # is displayed on screen.
ADJUSTABILITY: N/A
INTERACTION: Copies all settings, including model name, modulation, etc.
DESIRED END RESULT: Make an exact copy of a model for backup, to copy to
CAMPac to use in another radio, etc.
CAUTION: Any existing model data in the model memory copied INTO will be lost.
33
GOAL:
Copy model M1 into model M3, while
already in model M3 and using the LV2
programming menus. If using LV3, select
MDL-COPY from menu 2.) (If using LV1, first
change level selection to LV2. See p. 12.)
Where Next:
STEPS:
Open and select menu 2.
Select MDL-COPY.
Select the model # to copy INTO.
Confirm your change.
Close
INPUTS:
to M3.
for 1 second.
Name the model (MDL-NAME): See p. 15.
Select a different model (MDL-SEL): See P. 14.
Select modulation (FM/PCM/HRS) (MOD-MODE): See p. 16. (Hint: remember to power
off and back on to begin transmitting in new modulation.)