55
Idle-Up Warning:
• IDLE UP “MIX WARNING” displays if the idle up mix is turned on when the
transmitter is turned on.
• To stop the alarm, move the idle-up switch to off.
• Alarm tone: 7 beeps, pause, repeat.
Memory Error:
• MAIN MEMORY “ACCESS ERROR” displays when the transmitter is turned on
and a problem occurs with accessing a model.
• To stop the alarm, turn off the transmitter. Turn it back on. If the alarm
sounds again, send for service. If it does not, the system is ready for use.
• Alarm tone: 7 beeps, pause, repeat.
To Next Page
Loading...
