FUTABA 4PK 2.4GHZ - System Functions (SYSTM)

109
Function
(Opening Screen)
MENU 1
Press t
he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t
he button
* When the direct call button
is set, the setup screen is also
called by the following method:
1
(Setting the battery type)
Select the setting item "BATT-TYP" by (JOG) button up or down
operation, and select the mode by pressing the (+) or (-) button.
"NIMH 5CELL" :Futaba 5-cells rechargeable battery
"DRY 4CELL" :Dry cell battery (alkaline battery recommended) 4 batteries
(Setting the liquid crystal backlighting mode)
Select the setting item "LCD-BLHT" by (JOG) button up or down
operation, and select the mode by pressing the (+) or (-) button.
"KEY-ON" :Fixed time backlighting ON after button operated.
"ALWAYS" :Backlighting always ON
"OFF" :Backlighting OFF
(Setting liquid crystal backlighting time)
Select the setting item "LHT-TIME" by (JOG) button up or down
operation, and use the (+) and (-) buttons to set the ON time.
- When "KEY-ON" is set at the preceding item, this ON time becomes effective .
(Jog button LED mode)
Select the setting item "JOG-BLHT" by (JOG) button up or down
operation, and use the (+) and (-) buttons to set the ON time.
- When "KEY-ON" is set at the preceding item, this ON time becomes effective.
"LCD-BLHT" :Link to LCD screen backlight setting
"OFF" :Backlighting OFF
System function setup
BUZ-TONE
CONTRAST
LED-MODE
DISP-SEL
2ND-COND
OPE-TIME
2.4G-BND
LHT-TIME
LCD-BLHT
BATT-TYP
JOG-BLHT
MENU 1
MENU 2
MENU 3
Setting item selection
The items move in the order
shown in the figure above.
Setup items
BATT-TYP :Battery type
LCD-MODE :Backlighting mode
LHT-TIME :Backlighting time
JOG-BLHT : Jog button LED mode
CONTRAST :Contrast
BUZ-TONE :Buzzer tone
LED-MODE :LED color
DISP-SEL :Initial screen mode
2ND-COND :2nd condition function
OPE-TIME :Power off forgotten alarm
2.4G-BND :2.4GHz band mode
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen.
Backlight mode (LCD-BLHT)
KEY-ON, ALWAYS, OFF
Backlighting time (LHT-TIME)
1~30
Initial value: 10
Battery Type (BATT-TYP)
NIMH 5CELL, DRY 4CELL
Jog button LED mode (JOG-BLHT)
LCD-BLHT, OFF
System Functions "SYSTM"
s3ELECTTHESETTINGITEMBY
button
*
blinks at the current
setup item.