110
Function
(Adjusting the liquid crystal contrast)
Select the setting item "CONTRAST" by (JOG) button up or
down operation, and use the (+) and (-) buttons to adjust the
screen contrast.
- Adjust to an easy-to-see contrast.
(Adjusting the buzzer tone)
Select the setting item "BUZ-TONE" by (JOG) button up or down
operation, and use the (+) and (-) buttons to adjust the tone.
- Decide by referring to the tone at adjustment.
(Changing the LED display color)
Select the setting item "LED-MODE" by (JOG) button up or down
operation, and use the (+) and (-) buttons to select the color.
- Select your favorite color while viewing the LED color.
(Changing the initial screen display mode)
Select the setting item "DISP-SEL" by (JOG) button up or down
operation, and use the (+) and (-) buttons to select the display
mode.
"Futaba" :"Futaba" logo is displayed on the initial screen.
"TIMER" :Timer screen is displayed on the initial screen.
"SRV-VIEW" :Servo operation graph is displayed on the initial screen.
"USR-NAME" :User name
"TRM/DIAL" :The trim and dial information is enlarged and displayed on
the initial screen.
(Setting the 2nd condition function)
Select the setting item "2ND-COND" by (JOG) button up or
down operation, and use the (+) and (-) buttons to select the
display mode.
"ACT" :2ND Condition ON
"INH" :2ND Condition OFF
(Changing the power off forgotten alarm setting)
Select the setting item "OPE-TIME" by (JOG) button up or down
operation, and use the (+) and (-) buttons to select the power off
forgotten alarm mode.
"10m" :If an operation is not performed within 10 minutes while the power
is on, an audible alarm sounds.
"OFF" :Power off forgotten alarm setting OFF
(Changing the 2.4GHz band mode)
Select the setting item "2.4G-BND" by (JOG) button up or down
operation, and use the (+) and (-) buttons to select the power off
forgotten alarm mode.
"GENERAL" :Always use it
"FRANCE" :Using this system in France
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
2nd condition (2ND-COND)
ACT, INH
2.4GHz band (2.4G-BND)
GENERAL, FRANCE
The power off forgotten alarm
(OPE-TIME)
10m, OFF
Contrast (CONTRAST)
-10~0~+10
Initial value: 0
Buzzer tone (BUZ-TONE)
OFF, 1~75~100
Initial value: 85
LED color (LED-MODE)
(OFF), RED, GREEN, YEL-
LOW, BLUE, PURPLE, LIGHT
BLUE, WHITE
Initialization :LIGHT BLUE
Initial screen mode (DISP-MODE)
Futaba, TIMER,SRV-VIEW,
USR-NAME, TRM/DIAL
System Functions "SYSTM"
To Next Page
Loading...
