19
Gyro Set Dir---4
Gyro Set Dir---5
Gyro Set Dir---6
AIL ---------- R
ELE --------- R
RUD -------- R
AIL ---------- R
ELE --------- R
RUD -------- R
AIL ---------- N
ELE --------- N
RUD -------- N
AIL ---------- N
ELE --------- N
RUD -------- R
AIL ---------- R
ELE --------- N
RUD -------- N
AIL ---------- N
ELE --------- R
RUD -------- N
AIL ---------- R
ELE --------- N
RUD -------- R
AIL ---------- N
ELE --------- N
RUD -------- R
AIL ---------- N
ELE --------- R
RUD -------- R
AIL ---------- R
ELE --------- R
RUD -------- R
*Depending on the type of mounting plate,
it is also possible to mount as shown in
the fi gure.
*Depending on the type of mounting plate,
it is also possible to mount as shown in
the fi gure.
It is necessary to set the motion direction of each gyro by "AGy.Dir", "EGy.
Dir" of "SWH. BASIC" menu (page 49) and "Gyro.Dir" of "RUD BASIC" menu
(page 57).
AIL - Aileron (Roll) axis / ELE - Elevator (Pitch) axis / RUD - Rudder (Yaw) axis
N --- Normal / R --- Reverse
AIL ---------- R
ELE --------- N
RUD -------- N
AIL ---------- N
ELE --------- R
RUD -------- N