6. Usage and Maintenance
Replacing Rear Turn Sig
nal Light Bulb
1. Remove
the rear combination light A. => Refer
to Page 362
2. Rotate counter-clockwise and take out the rear
turn signal holder and bulb ①.
3. Remove
the rear turn signal bulb ① from the
rear turn signal holder.
4. Generally, perform the installation in the
reverse order of removal procedures
Replacing Brake Light Bulb
1. Remove
the rear combination light A. => Refer
to Page 362
2. Rotate counter-clockwise and take out the
brake light holder and bulb ①.
To Next Page
Loading...
