GAC GS5 User Manual

5. Driving Directions
5.4.2 Cruise Control System *
The cruise control system can be set at
40km/h or higher. Once the speed is set, the driver
can release the accelerator pedal and the vehicle
will run at the preset speed.
Warning
• To avoid accidents, the cruise control system
cannot be used where there is dense traffic,
hills, winding roads, or slippery roads.
• Use the cruise control system car
efully. Make
sure that the vehicle has a safe distance from
the front one after the speed is set.
•
The cruise control system shall be shut down
timely after stopping cruise control.
Operation Button
1. :
Enable/disable cruise
2. : Stop cruise control
3. SET/-: Activate the cruise control
function/deceleration
4. RES/+: Restore the cruise control
function/acceleration
Enable cruise
– Short press the button to turn on the cruise
control system. Then the indicator light
on
t
he instrument cluster goes on in white.
– Increase the speed to more than 40 km/h.
– Short press the button “SET/-”. The indicator
light on the instrument cluster turns to
green and the vehicle enters the cruise control
state. Then release the accelerator pedal.
Stopping Cruise Control
The following operations will disable cruise control:
– Step on the brake pedal.
– Short press the button (stopping cruise
control but retain the set speed).
– Short press the button (stopping cruise
control and clear the set speed).
– Lift the EPB button
– ESP system starts.
193
183

GAC GS5 Specifications

General

Brand	GAC
Model	GS5
Category	Automobile
Language	English