8. Handling of Accident
8.7 Emergency Towing
The front and rear parts of the vehicle are both
provided with emergency traction port of threaded
hole structure, to which the towing hook (a vehicle
tool) can be installed for traction operation.
Hint
The towing hook shall be placed on the vehicle
so as to be used when needed.
Warning
Towing a vehicle in emergency is risky. If you
have no
experience, do not tow any other vehicle
to prevent accidents.
Ins
tallation of Towing Hook
– Tak
e out the towing hook and the wrench for
removing wheel bolts from the tool box in the
trunk.
– Use a finger to push hard the triangle position
of the towing hook cover to make it cock, and
then move the towing hook cover away.
– Sc
rew the towing hook ① into the threaded
hole clockwise.
– Insert the wrench for removing wheel bolts ②
into the towing hook port, and rotate the
wrench clockwise to securely screw the towing
hook into the threaded hole.
315
To Next Page
Loading...
