8. Handling of Accident
8.3 Replacing the Flat Tire
Preparations
– Apply
parking brake.
– For vehicle models with automatic
transmission, turn the shift lever to the “P” gear.
– For vehicle models with manual transmission,
turn the shift lever to 1st gear.
– Turn the ignition switch to the "OFF" position,
and turn on the hazard warning indicator light.
– Put the warning triangle at the appropriate
place behind the vehicle.
– Wedge the vehicle with appropriate articles to
prevent it moving and change the diagonal
wheel.
– Take out the vehicle tools and the spare tire.
Warning
• Strictly obey relevant laws and regulations.
• All passengers must get off the vehicle
and
wait in a safe place.
Unscrewing the Wheel Bolts
Put the wren
ch firmly on the wheel bolt and
loosen the bolt for counterclockwise in direction.
Caution
Unscrew the wheel bolt for one turn only
before lifting the vehicle. Unscrew the wheel bolt
out after the vehicle is lifted. Remove the flat tire.
Lifting the Vehicle
– Place the jac
k at the position just under the
ridge nearest to the flat tire.
– Lift the jack and ensure its groove to fit the
ridge.
– Check whether the jack is placed steadily and
fits the ground tightly.
301
To Next Page
Loading...
Need help?
General
