5. Driving Directions
5.1 Starting and Driving
5.1.1 Ignition Switch
Start-Stop switch*
Onl
y when the smart key is detected in the
vehicle can the start switch (ENGINE START
STOP button) be operated.
When the automatic transmission shift lever is
in the "P" or "N" position and the brake pedal is
depressed, the start switch indicator light turns
green, and then press the start switch to start the
engine.
When the AT shift lever is at “P” position
without pressing the brake pedal, press the start
switch and then it will switch by the order of “OFF
→ ACC → ON → OFF ”.
– OFF: Switch indicator light is off and the Start
switch is off.
– ACC: When the switch indicator light is orange,
the circuits of power outlet and other
accessories are switched on.
– ON: Switch indicator light is orange,
instrument light is on and all electrical
equipment circuits are switched on.
• With the start switch at "ON" position, when
the AT shift lever is at any position
other than
"P" position without depressing the brake
pedal, press the start switch to switch it from
"ON" to "ACC". If you continue to press the
start switch, it will switch in the sequence of
"ON → ACC → ON" and will not return to
"OFF". With the switch
at "ACC" position,
when the AT shift lever will switch from any
position other than "P" to "P", the switch will
automatically return to "OFF" position without
being pressed.
•
When the AT shift lever is at the "P" position
and the start switch is switched
from "OFF" to
"ACC" and kept at the "ACC" position for an
hour, the vehicle
will enter the power saving
mode and the switch will return to "OFF"
position automatically.
157
To Next Page
Loading...
