5. Driving Directions
• The standard half-load tire pressure is used
as the normal setting for alarm reference of
the TPMS.
• If the tire
suffers high temperature, high
pressure, low pressure, or rapid air leakage,
the instrument cluster will give early warning,
with position of the corresponding failed tire
displayed in circular manner. If the TPMS
fails, the instrument cluster will give ea
rly
warning, with “Please check the TPMS”
displayed in circular manner.
•
Where there is high temperature alarm, it is
recommended to stop the vehicle
until the tires cool.
•
The traveling alarm not handled until the
vehicle stops will remain when the
vehicle
starts again, with pressure and temperature
displayed as “---
”. But when the speed
exceeds 25 km/h, the receiver will receive
updated data and update relevant data, and
then the alarm disappears.
After replacing with a spare tire or with a new
tire in some other places, the low tire pressure
alarm lasts during traveling because of the missing
tire sensor. Do not mistake this as abnormal tire
pressure signal.
228
To Next Page
Loading...
