3. Safety Operating Instructions
Seat Belt Pretensioner Equipment
The seat bel
t pretensioner equipment can
reduce the pressure exerted by the seat belt on the
chest and improve the protection performance.
– The seat belt restrains the driver and
passengers to sit in a suitable position,
preventing the body over tilting forward before
the collision.
– The seat belt pretensioner equipment will be
activated by the electronic control unit in the
event of a severe collision, and then the
pretensioner equipment will drive the seatbelt
webbing tighten by immediate pulling back.
– In the event of collision, the driver's body will
move forward then the seat belt pretensioners
activate, to make the restraining force to the
body at a certain range, preventing a further
injury towards the driver; at the same time, the
seat belt pretensioners activate in conjunction
with the airbag to provide an optimal
protection.
Hint
• When being initiated, the seat belt
pretensioner equipment releases little
harmless smoke and generates sound, which
is normal.
• After collision, initiated pretensioner cannot be
reused, and indicator light of the
supplemental restraint system (SRS) will stay
on. Please contact an authorized GAC
Motor's dealer for replacement.
Adjust Seat Belt Height
– Upward
adjustment: Hold the guide part and
move it up and down to adjust the seat belt to
the desired height.
– Downward adjustment: Press the unlocking
switch ① of the guide and move it downward
to adjust the shoulder belt to the desired
height.
– After the completion of adjustment, check
whether the guide part is securely locked.
16
To Next Page
Loading...
Need help?
General
