6. Usage and Maintenance
Add Engine Oil
Add engine o
il according to the following steps
if found necessary after the engine oil level is
checked:
– Press and open the engine oil filler cap.
– Screw
out the engine oil filler cap
anticlockwise.
– Fill oil into the filler repeatedly by small amount,
and check the oil level after each filling.
– When the oil level is close to the upper limit
mark (H), i.e. the engine oil is sufficient, stop
adding oil, assemble the filler cap and tighten
clockwise.
Warning
• Be careful when adding engine oil to prevent
spilling. If the engine oil splashes on the skin,
rinse it thoroughly.
• If too much engine oil is added, do not start the
engine, but contact the authorized GAC
Motor's dealer for handling in time.
Otherwise, the three-way catalytic converter
may be damaged.
• After the engine oil is added, tighten the
engine oil filler cap to prevent the engine oil
from spilling and avoid fire when the engine is
operating.
• The engine oil is poisonous. Therefore, store it
in the original container and keep it beyond the
reach of children to prevent eating by mistake
and poisoning.
• Add no other lubricant into oil; otherwise, the
engine may be damaged. Any fault caused by
addition of lubricant isn't included in quality
guarantee.
260
To Next Page
Loading...
