6. Usage and Maintenance
– Lift the wiper arm. Press the locking button ①.
Slide the wiper blade upward to remove it.
– Place a new wiper blade back to the wiper arm
in reverse steps, and install after hearing a
“click”.
– Carefully lower the wiper arm back to the
windshield.
– Switch the Ignition Switch to “ON” gear again,
making the wiper arm back to its original
position automatically.
Replacing Rear Windshield Wiper Blade
– Lift the wiper arm.
– Draw and remove the wiper blade ①.
– Install the new wiper blade back to the wiper
arm.
– Carefully lower the wiper arm back to the
windshield.
It is recommended to replace your wiper
blade at authorized GAC Motor's dealer when
necessary.
Caution
• When lifting the wiper arm, grasp the wiper
arm with hand, and do not grasp the soft wiper
blade.
•
Be sure to use new wiper blade with the same
length and specification.
• Carefully lower the wiper arm to prevent
striking the windscreen due to instantaneous
drop.
•
Check the condition of the wiper blades
regularly, and replace them as required.
Replace any damaged wiper blade in time.
•
Seriously worn or dirty wiper blade is very
easy to scratch the windscreen, an
d will
influence the forward visibility and reduce the
driving safety during use.
265
To Next Page
Loading...
