6. Usage and Maintenance
Inspecting the Brake Fluid Level
Check
whether the brake fluid level is between
the MAX and MIN marks on the side of the tank
when the engine cools down.
– MAX refers to the upper limit mark of brake
fluid.
– MIN refers to the lower limit mark of brake fluid.
– The brake fluid level should be between MAX
and MIN.
The fluid level will be slightly lower during
driving due to wear of the brake lining and self-
adjustment.
If the brake fluid level drops or falls to below
“MIN”, the braking system may leak.
• Read and follow the warnings and instructions
before opening the engine hood.
• Check the brake fluid level. If it is below “MIN”,
add brake fluid.
• If
the brake system warning light does not go
off or it goes on during driving after the brake
fluid is added, the brake system may leak,
dropping the fluid level, or it is faulty. In such
cases, do not continue driving, but contact an
authorized GAC Motor's dealer for
maintenance.
267
To Next Page
Loading...
Need help?
General
