GAC GS5 User Manual

6. Usage and Maintenance
Replacing High Beam Light Bulb
1. Un
screw the high beam seal cap ①
anticlockwise.
2. Press the fixing wire ② and remove it from the
fixing slot.
3. Remove the high beam holder and bulb ③.
4. Pul
l out the high beam bulb ③ from the high
beam holder.
5. Operate in a reverse order after the high beam
bulb is replaced.
275
232

GAC GS5 Specifications

General

Brand	GAC
Model	GS5
Category	Automobile
Language	English