3. Safety Operating Instructions
The installation instructions for LATCH system
child seat are mainly introduced as follows:
1. Place the child safety seat on the seat. Find
the lower anchor point ①. Insert the lower
guide slot (see the arrows) into the lower
anchor point ① in the gap until it clicks.
2. Raise the headrest to the upmost position.
Pass the anchoring strap through the headrest
support to engage the upper anchor point ②.
Ensure that the anchoring strap is not twisted.
3. Tension the anchoring strap. Shake the child
safety seat forward and backward, leftward
and rightward to ensure it is securely
anchored.
4. Ensure that all unused seat belts within reach
of children are locked.
34
To Next Page
Loading...
