4. Operating System and Equipment
Menu setting
Press ◄/► on the right side of the steering
wheel to enter the menu setting interface when the
ignition switch is at "ON" position and the vehicle
speed is zero; and then press ▲/▼ on the OK button
to move the cursor, press OK to enter the
menu at
the lower level, and press OK again to select, confirm
or cancel.
• Operation of other instrument clusters is similar
to that of LCD instrument cluster as shown in
the figure.
•
If menu setting operation is conducted when
the vehicle speed
is not zero, the alarm
message "Safe Driving Tip: No setting
operation before the vehicle
is stopped". If the
message is displayed for over 5s, the
instrument cluster will automatically switch to
the travel information interface.
45
To Next Page
Loading...
