4. Operating System and Equipment
– When the sunroof is fully closed, if position
on the sunroof switch ① is pressed upward,
the sunroof will tilt outward. To close t
he
s
unroof, push forward the sunroof switch ①.
Sunroof Anti-pinch Function
When the sunroof slides to close or is closed
downward from tilting, the anti-pinch function will
be activated. The purpose of the anti-pinch function
is to prevent the sunroof from pinching big items
when it is closed:
– During sliding, if the anti-pinch function is
triggered, the sunroof will move a certain
distance along the open direction and then
stop.
– During closing from tilting, if the anti-pinch
function is triggered, the sunroof will move
along the tilt direction until the maximum tilt
position.
Caution
Do not try to operate the electric sunroof
below -20°C. In such environment, the anti-
function may not
be activated, resulting in
accidents. In addition, the low temperature may
cause certain damage to the motor.
Warning
• The anti-pinch function cannot prevent the
sunroof from pinching light and thin or other
items in small size.
• Be sure to close the sunroof with extra car
e.
To avoid serious injury, make sure that
nobody stays within the closing movement
area of the sunroof.
•
The electric sunroof stops sensing obstacle
when it is almost closed. At this time, there is
no anti-pinch function.
• Do not attempt to activate the anti-
pinch
function by hand or other body parts. Doing so
can cause serious injury to your body easily.
80
To Next Page
Loading...
