How to fix a Gaggia Evolution E90 that won't turn on?
If your Gaggia Coffee Maker is not turning on, first, ensure that the main switch is in the ON position. Next, check that the machine's switch is set to the '1' position. If it still doesn't power on, there might be an issue with the electrical connection, and you should seek assistance from a qualified technician to inspect it.
Why is my Gaggia Coffee Maker leaking water on the counter?
If your Gaggia Coffee Maker is leaking water onto the counter, it could be due to a few reasons. The drainage tray might be dirty, so try cleaning it. Also, the drain tube might be clogged or detached, so try replacing the drain tube. For other leaks, it's best to consult a specialized technician.
Why is my Gaggia Evolution E90 dispensing coffee too slowly?
If your Gaggia Coffee Maker is dispensing coffee too slowly, it might be due to a few reasons. The grind might be too fine, so try adjusting it to a coarser setting. Another reason could be a dirty portafilter; try replacing the filter and cleaning the portafilter more often. For group blockages, or issues with the gigleur or solenoid valve, it's best to consult a specialized technician.
Why is my Gaggia Coffee Maker brewing cold coffee?
If your Gaggia Coffee Maker is producing coffee that's too cold, there could be several reasons. Scale buildup on the heat exchangers or the heating element could be a factor, so it is better to consult a specialized technician. Also, oxidized pressure switch contacts or a faulty electrical connection might be the cause, in these cases you should also consult a specialized technician. If the heating element is partially burnt out, consider replacing it.
What to do if coffee grounds are wet in my Gaggia Evolution E90 Coffee Maker?
If the coffee grounds are wet when using your Gaggia Coffee Maker, it could be due to a few reasons. The grind might be too fine, so try adjusting it to a coarser setting. Also, the group might still be cold, so wait until the machine reaches the correct temperature. If the solenoid valve isn't discharging, it's best to consult a specialized technician.
Why is no steam coming out of the Gaggia Coffee Maker wands?
If no steam is coming out of the wands of your Gaggia Coffee Maker, it might be due to a few reasons. There could be too much water in the boiler, see the specific problem to solve it. The heating element might be damaged, so it is better to consult a specialized technician. The sprayer might be clogged, so try cleaning the sprayer. The safety resistor might be disengaged, so try reinserting the resistor.
Why is my Gaggia Evolution E90 Coffee Maker dispensing coffee too fast?
If your Gaggia Coffee Maker is dispensing coffee too quickly, it's likely that the grind is too coarse. Adjust the grind to a finer setting.
What to do if there's no water in my Gaggia Evolution E90 boiler?
If there's no water in the boiler of your Gaggia Coffee Maker, it could be due to a few reasons. The main tap might be closed, so try opening the main tap. The pump filter might be clogged, so try replacing the filter. If the motor pump isn't working, it's best to consult a specialized technician.
Why is the water level too high in my Gaggia Coffee Maker boiler?
If the water level in the boiler of your Gaggia Coffee Maker is too high, it could be due to a few reasons. The pump motor might be stuck on, so it is better to consult a specialized technician. The heat exchanger might be holed, so it is better to consult a specialized technician. The automatic fill solenoid valve might be blocked, so it is better to consult a specialized technician.
Why is my Gaggia Evolution E90 brewing coffee too hot?
If the coffee dispensed from your Gaggia Coffee Maker is too hot, it's likely that the pressure switch is incorrectly calibrated. Adjust the pressure switch using the appropriate screw (refer to the "Pressure Switch Adjustment" chapter).
General| Brand | Gaggia |
|---|---|
| Model | Evolution E90 |
| Category | Coffee Maker |
| Language | English |
To Next Page