English
6
57
When the machine is new
the filter-holder sump may
not be aligned
(perpendicular to the
machine itself) as shown in
the figure at the side,
however this does not
effect the efficient function
of the same. After a short
period of use the sump will
gradually settle into a
correct position.
Options include shower
head gaskets that are
thinner (8.1 mm, part no.
WGANG01/005) or
thicker (9.0 mm, part no.
WGANG01/002) than the
standard shower head
gasket (8.5 mm, part no.
WGANG01/001/B).
6.4 Filters for coffee machine
Depending on the quantity of coffee ground, the
appropriate filter must be as shown below to avoid that,
once the coffee has dripped out, the leftover powder
remains attached to the nozzle.
WGANF08/002/B
1 coffee cup of 5,5 gr. ÷ 6,5 gr.
Pod for 1 coffee
Barley pod for 1 dose
WGANF08/004/B
1 coffee cup of 6 gr. ÷ 7 gr.
WGANF08/005/B
2 coffee cups of 12 gr. ÷ 14 gr.
WGANF08/009/B
Double pod for 2 coffees
The filter may be recognised by the letter “C” printed
inside
To Next Page
Loading...
