Galcon Dc-4 Installation And Operating Instructions

3.4 Setting the Irrigation Duration
This setting determines how long the irrigation
lasts.
1. Press © until X appears.
2. Press ®). The hour digits blink. Set the
desired number of hours by pressing @)
and ©. Press ©) again - the minute digits
blink. Set the desired number of minutes
by pressing @ and ©
3. Press © to proceed to the next step.
4. In professional controllers -"S" series, the
duration of the irrigation can also be
programmed in seconds.
The method of programming is the same.
M Tu W Th F SaSu
rain off
6056 - -DC6s 6s
3.5 Selecting Days of the Week for Irrigation
This setting determines which days of the week the irrigation controller will operate
the specified valve.
. Press © until È appears.
2. Press ©. A blinking arrow appears at the
top of the display, under Monday.
3. Move the blinking arrow to the desired day
of the week by pressing ©,
4. Selecting/adding irrigation days:
Press @). The arrow under the selected
day stops blinking, moves one position to
the right, and blinks under the next day of
the week. Youcan select additionaldays of
the week in the same manner.
5. Canceling Scheduled Irrigation Days:
Have the arrow blink under the day you
want to cancel. Press ©), The arrow under
—h
M Tu W Th F SaSu
now
Sensor
W.open
w.close
manual
rain off
6056 - DC 6s
the selected day will disappear. The blinking arrow will move one position to the right,
under the next day of the week. Cancel additional scheduled irrigation days in the
same manner.
6. Press © to proceed to the next step.
e When the blinking arrow reaches Sunday, pressing again displays in the center of the
display, and & at the top right of the display. To return to the "Selecting/Adding Irrigation
Days" mode, press once or twice.
11

Galcon Dc-4 Specifications

General

Brand	Galcon
Model	Dc-4
Category	Controller
Language	English