Galcon Dc-4 Installation And Operating Instructions

2.2 Manual-Mechanical Operation
The irrigation valve can be opened and closed
independent of the controller's operation.
Manual operation is useful when immediate operation
irrigation is required, and there is insufficient handle
time or knowledge to program the controller.
The valve handle is located on the solenoid,
and has three positions: Open, Automatic
[AUTO] and Closed.
(MD
Open Close
Remember! For controller operated irrigation, the
valve handle must be in the middle (AUTO) position.
mechanical
2.3 Battery Installation
Open the battery compartment cover.
Insert batteries (see illustration). All the
controller display elements appear briefly
on the display, followed by a blinking time
of 12:00. The controller is now ready to
be programmed.
Important!
Make sure to replace the battery
compartment cover with the grip aligned
with the left arrow, and then rotate the
cover 1/8 of a turn to the right.

Galcon Dc-4 Specifications

General

Brand	Galcon
Model	Dc-4
Category	Controller
Language	English