GTLE Operating Manual Version 1.2 Page 29 of 35
17. Maintenance instructions
Please note that maintenance work may only be carried out with the main switch
switched off and secured against being switched on again.
The following maintenance work can be carried out by yourself or by an assistant:
If track tubes are dirty (e.g. due to flattened dust), they can be cleaned with a household
cleaner or stainless steel cleaner to get them free of black spots.
After some time, squeaking noises may occur at the pivot points of the access ramp
and the platform due to friction. These can be eliminated by using commercially
available lubricants.
In case of heavy soiling, the platform can be wiped clean with a damp cloth. Please
wipe the platform dry again afterwards.
We strongly recommend wearing gloves during these maintenance operations
to minimise the risk of injury.
Please check the following safety functions regularly:
Emergency stop button (cf. Figure 1, Pos.6)
Emergency call signal button (cf. Figure 1,
Contact base (cf. Figure 5, Pos.12)
Lift stops on the way down
Switch on the access ramps
(cf. Figure 5,Pos.10)
Lift stops on the way up or
down
Non-compliance with the maintenance instructions can lead to loss of warranty claims under
certain circumstances.
The average life of the batteries is between 3-5 years. However, we recommend changing the
batteries every 3 years at the latest to ensure continuous operation. It is essential that the
batteries are changed by a specialist.
To ensure the safety and reliability of this product, repairs and other
maintenance or adjustments should only be carried out by Ganser authorised
dealers using only genuine Ganser spare parts.
To Next Page
Loading...