Page 28 of 35 Version 1.2GTLE Operating Manual
15. Disassembly and disposal
Disassembly and disposal of the stairlift after its period of use must also be carried out by a
specialist company. Any national regulations must be observed when disposing of the product.
16. Installation and commissioning
Installation may only be carried out by instructed and authorised Ganser Liftsysteme personnel
or by authorised partner companies.
The sufficient static load capacity of the masonry or the substrate must be ensured. Ganser
Liftsysteme accepts no liability whatsoever in this matter.
During installation, the wall structure of the load-bearing wall must be taken into account and
the installation material (dowels, anchors, etc.) must be selected according to the forces that
occur (pull-out forces), see installation documents.
For a precise indication of how to proceed during installation, please refer to the installation
instructions.
Should unforeseen problems occur during installation, please contact Ganser Liftsysteme's
customer service immediately in order to avoid serious damage.
To Next Page
Loading...