Page 4 of 35 Version 1.2 GTLE Operating Manual
4. General product description
Our products suitably combine the requirements of climbing stairs with excellent integration
into the familiar environment.
On the one hand, the upper track tube can be used as a handrail, and on the other hand, the
carriage and track can be powder-coated accordingly from the extensive RAL colour palette
on request.
The track does not need to be lubricated, which eliminates the possibility of unwanted
contamination.
The maximum load capacity is 300 kg, the maximum platform size is
approx. 800 mm x 1,250 mm, the operating speed does not exceed 0.15 m/s and the system
is driven by a gear drive. The continuous sound pressure level is below 70 dB (A).
The load-carrying device is connected to the track by 6 rollers and a drive gear. The running
rollers are guided by two parallel stainless steel round profiles.
An electric motor drives the gear wheel positively via a self-locking worm gear, absorbing all
horizontal and vertical forces that occur.
The track consists of a stainless steel round tube (V2A) and a stainless steel rack (V2A) with
fastening lugs and is attached to an existing wall, supports or a steel structure.
A safety catch prevents uncontrolled movement of the platform stairlift along the track in the
event of a defect in a drive element.
To Next Page
Loading...