Gantner GAT NET.Lock 7000 - Page 35

GAT NET.Lock 7000 System
Configuration and Operation
www.gantner.com HB_GAT-NETLOCK7000--EN_30 35
Hardware View
Figure 5.15 - GAT Relaxx, Hardware View
The hardware view is devided into the following areas:
1 - Main menu: Access to all GAT Relaxx functions by selecting the corresponding menu items.
2 - Symbol bar: Fast access to the main functions.
3 - Switch user interface: Next to the "Start" tab, a tab is displayed for each user interface. Several Hardware
View and Organization View tabs as well as other tabs like alarm and log tabs are
possible.
4 - Selective symbol bar: Fast access to the main functions of the currently selected user interface.
5 - System overview: Here, the hardware of the entire system is defined. Communication channels and
connected controllers can be added and the lockers used can be defined per con-
troller.
6 - Locker overview: Here the lockers (GAT NET.Lock 7000) of the controller selected on the left are
displayed together with their current states.
7 - Information area: Here, the information regarding the locker selected in middle area (6) is displayed.
8 - Locker actions: In this field different lock actions can be performed, like for example to open all
lockers with the button "Open all lockers".
8 - Status bar: The status bar displays various information regarding the GAT Relaxx and the sys-
tem, such as
- whether the GAT Relaxx service is running and wether the connection is OK.
- system type (online/offline).
- whether a USB driver is installed.
- information regarding the logged-in user.
1
2
9
4
3
5
6
7
8