Gantner GAT NET.Lock 7020 System User Manual

GAT NET.Lock 7020 System
Electrical Connections
www.gantner.com HB_GAT-NETLOCK7020--EN_12 45
Connecting the power supply to the sub controller
► Connect the power supply to the MOLEX plug labelled “Power” on the controller.
Figure 4.10 - Power supply connection on the GAT NET.Controller S 7020
For controllers with a non-USB power supply, the power supply can be stored in the designated storage space on
the side of the controller.
► Remove the compartment cover (1),
► Place the power supply into the compartment and insert the cabling into the designated slots on the base of the
controller.
► Replace the compartment cover.
Figure 4.11 - Power supply storage location

Gantner GAT NET.Lock 7020 System Specifications

General

Brand	Gantner
Model	GAT NET.Lock 7020 System
Category	Locks
Language	English