50
The setup is same with normal recording setup.
It record as setup under normal condition. But when the event arises on channel, the channel with event setup
would record as D1, 30 FPS automatically.
Incase the event happens at several channel at one time, it would share the max. recording rate appropriately.
For recording setup, the operator should setup as 4 divided parts.
The operator can setup Max.CIF, 120FPS each divided part.
- Select the Resolution.
- Select the Frame Rate
- Select the Quality. (Low, standard, high, highest)
- The operator can setup other divided part, using the same method.
- In case of Audio setup, it is assigned at Nr.1, 2, 3, 4 Channel basically.
(It can not be changed)
- Select the Intensive recording condition with Alarm, Motion and User defined event.
- In case of weekly, it is almost the same setup as daily setup. It can setup each date.
Schedule
The operator can select the record on/ off each time and channel.
Drag the desired section for selection and click the mouse right button.
Then, recording option will appear. The operator can select the recording on/off each time and channel.
To Next Page
Loading...
