57
Press the SHUTDOWN” and below would appear.
Pressing “OK” after inputting the Password and he system would be power off.
ERROR CODE LIST
Error Code #015 : Fail to reserve.
Error Code #026 : Can't enter the PTZ mode because all channels are covert.
Error Code #145 : Select backup channel.
Error Code #150 : Fail to send e-mail.
Error Code #181 : Flash memory error.
Error Code #182 : File operation error.
Error Code #183 : Upgrade file checksum error.
Error Code #184 : Flash memory size error.
Error Code #185 : Destination path error.
Error Code #186 : Written image checksum error.
Error Code #187 : Flash memory operation error.
REMOTE SW INSTALLATION
System Requirement
① Main Board (CPU): Pentium-500(Minimum), Pentium 4 recommended
② OS: Higher than Windows 2000,DirectX 7.0A
③ Memory (RAM): More than 128 M
④ VGA: Graphic card that support the DIRECT-X ※IMM4 Codec (When Playback Backup File)
To Next Page
Loading...
