4. After making your door selections, swipe the screen to the right with your finger to
view the door control page.
5. The following commands are then available to the user:
Press and hold the OPEN button to open the door.
Press and hold the CLOSE button to close the door.
Press the STOP button to stop a door during movement.
6. Shortly after a command has been sent, the GarageSmart™ App will automatically
retrieve and display the door status of the last door that was selected.
See the section Verify Garage Door Status using the GarageSmart™ App below for
further information.
1. Remote keys are assigned within the control panel of your account. Please see the “Online Control
Panel Manual” for more information on creating or changing Remote Keys for your GarageSmart™
device.
2. Access information will not be saved if the user does not click on “Save Access Code” before changing
screens or exiting out of settings.
To Next Page
Loading...
Need help?
General