Network
The PC of the Tool24 PickOne goods issue system can be connected to your
company network by means of the network connection.
Before establishing a network connection, contact customer service
See the 1.5 “Customer service” section on page 67.
USB
You can use the USB connection to connect a Smartline slave module to the
PC of the Tool24 PickOne goods issue system.
Before establishing the connection, contact customer service
See the 1.5 “Customer service” section on page 67.
5. Transport, packaging, and storage
5.1 Safety information for transport
Suspended loads
WARNING!
Risk of death resulting from suspended loads!
Loads can swing out or fall down during lifting operations. This can result
in serious injury or even death.
Never step or stand under or in the swivel range of
suspended loads.
Only move loads under observation.
Only use approved lifting aids and load attachment aids
with a sufficient load-bearing capacity.
Do not use any damaged lifting aids (for example, torn
or frayed ropes and belts).
Do not lay ropes and belts on sharp edges
and corners, do not knot or twist them.
Set down the load when you leave the workplace.
Improper transport
NOTICE!
Risk of damage to property due to improper transport!
The improper handling of transport items can result in significant damage
to property.
Always handle transport items carefully and in accordance
with the symbols and information on the packaging:
See the 5.1.1 “Symbols on packaging” section on page 91.
Only use the designated attachment points.
Remove packaging only shortly before installation.
DE
EN
FR
IT
ES
90
To Next Page
Loading...