Garmin G3000 User Manual

REFERENCE ONLY
1
Version 1.0
REFERENCE ONLY
Swapping GSA80 Roll & GSA80 Yaw Servo on Citation CJ3+
Garmin G3000 Software Version 10
Caution: Before starting the software or configuration loading process, certain
items may be required to be recorded first, to prevent loss of
information or settings. See Section 1 for details.
Caution: Make certain that all SD cards are available before starting. These are
usually located in a blue pouch onboard the aircraft (usually in AFM).
Caution: Follow all steps in a given section for specific loadings. Failure to do so
will result in probable rework.
Caution: Ensure that power is available through a GPU so that power is not
interrupted during the loading process.
Note: This document is to supplement, not replace, the Cessna Citation CJ3+
MM, and Garmin G3000 LMM.
Note: Reference latest revision of the Garmin G3000 LMM 190-01785-00.
Table of Contents
Introduction G3000 System Familiarization
Section 1 Determining Options Installed
Section 2 Software and Configuration Loading
Section 3 Final Verification / Return to Service
Section 4 FLEET ID / CRC Numbers
Section 5 Troubleshooting

Garmin G3000 Specifications

General

Display Type	LCD
Communication	VHF COM, SATCOM
Synthetic Vision	Yes
Operating System	Proprietary Garmin OS
Connectivity	Wi-Fi, Bluetooth
Power Supply	28 V DC
Certification	FAA, EASA
Resolution	1024 x 768 pixels
Interfaces	ARINC 429, Ethernet
Navigation	GPS, VOR, ILS
Weather	Radar
Suitable Aircraft	turboprops
Charts	Jeppesen
Display Size	14 inches
Type	Integrated Flight Deck System
Processor	High-performance multi-core processor
Weight	Varies depending on configuration
Dimensions	Varies depending on display size and configuration