Garmin G3000 - Ground Clutter Suppression (Stand Alone); Cabin Briefing; SurfaceWatch

REFERENCE ONLY
6
Version 1.0
REFERENCE ONLY
• Ground Clutter Suppression (Stand Alone Option Without Doppler & Turbulence)
o From the Home screen of either GTC 570, select the Weather button. Select
Weather Selection button. Select the WEATHER RADAR SETTINGS button & the
GND Clutter Suppression button will be visible, without the Turbulence
Detection button. Do not select YES if Doppler & Turbulence is selected YES
above.
• Cabin Briefing
o From the Home screen of either GTC 570, select AIRCRAFT SYSTEMS. If the Cabin
Briefing button is displayed, mark YES.
• SurfaceWatch
o From the Home screen of either GTC 570, select Utilities. Select Setup & then
Avionics Settings. Then select the Alerts tab. If the SurfaceWatch Inhibit button is
visible, mark YES. Note the Inhibit box will not be illuminated (resets at power up).
YES
NO
YES
NO
YES
NO