Garmin G3000 User Manual

REFERENCE ONLY
2
Version 1.0
REFERENCE ONLY
Introduction G3000 System Familiarization
When in configuration mode, select GDU controls on left side of GTC 1. Ensure that PFD 1 is
selected on the screen. The dual concentric knobs on the lower right bezel will be utilized, and
throughout this document will be referred to as the FMS small and large knob. The Enter
button will be in the lower right part of the screen.
As an alternative, you can use the dual concentric knobs (labeled PFD) and Enter button on the
GCU-275 controller mounted above PFD 1.

Garmin G3000 Specifications

General

Display Type	LCD
Communication	VHF COM, SATCOM
Synthetic Vision	Yes
Operating System	Proprietary Garmin OS
Connectivity	Wi-Fi, Bluetooth
Power Supply	28 V DC
Certification	FAA, EASA
Resolution	1024 x 768 pixels
Interfaces	ARINC 429, Ethernet
Navigation	GPS, VOR, ILS
Weather	Radar
Suitable Aircraft	turboprops
Charts	Jeppesen
Display Size	14 inches
Type	Integrated Flight Deck System
Processor	High-performance multi-core processor
Weight	Varies depending on configuration
Dimensions	Varies depending on display size and configuration