Garmin G3000 - Surfacewatch Voice Callouts

REFERENCE ONLY
12
Version 1.0
REFERENCE ONLY
• SurfaceWatch Voice Callouts (Only if SurfaceWatch option is installed)
o The system should still be in configuration mode.
o Push the FMS knob to deactivate the cursor.
o Rotate the small FMS knob to the right until on SurfaceWatch Configuration.
o If the following are shown, then the SurfaceWatch Voice Callouts are turned on:
 Five Thousand= RTO
 Four Thousand= RTO
 Three Thousand= RTO/LRO
 Two Thousand= RTO/LRO
 One Thousand= RTO/LRO
 Five Hundred= RTO/LRO
YES
NO