Garmin G3000 User Manual

REFERENCE ONLY
9
Version 1.0
REFERENCE ONLY
4) Press and hold the right knob on the left GTC and push the L Touch Control circuit
breaker in.
 Let go when you see initializing.
5) Press and hold the right knob on the right GTC and push the R Touch Control
circuit breaker in.
 Let go when you see initializing.
6) Press and hold the #12 softkey on the #2 PFD and push the R PFD circuit breaker
in.
 Let go when you see initializing.
 PFD 2 should come up in configuration mode.
• SYSTEM STATUS should show at the top of the screen.
7) Press and hold the #12 softkey on the MFD and push the MFD circuit breaker in.
 Let go when you see initializing.
 MFD should come up in configuration mode.
• SYSTEM STATUS should show at the top of the screen.
8) Press and hold the #12 softkey on the #1 PFD and turn on power.
 Let go when you see initializing.
9) Press the NO softkey at “DO YOU WANT TO UPDATE SYSTEM FILES?” prompt.
10) Press the NO softkey at “DO YOU WANT TO UPDATE THE CUSTOM GRAPHICS
FILES (EG, SPLASH SCREEN)?” if it appears.
11) PFD 1 should come up in configuration mode.
 SYSTEM UPLOAD should show at the top of the screen.

Garmin G3000 Specifications

General

Display Type	LCD
Communication	VHF COM, SATCOM
Synthetic Vision	Yes
Operating System	Proprietary Garmin OS
Connectivity	Wi-Fi, Bluetooth
Power Supply	28 V DC
Certification	FAA, EASA
Resolution	1024 x 768 pixels
Interfaces	ARINC 429, Ethernet
Navigation	GPS, VOR, ILS
Weather	Radar
Suitable Aircraft	turboprops
Charts	Jeppesen
Display Size	14 inches
Type	Integrated Flight Deck System
Processor	High-performance multi-core processor
Weight	Varies depending on configuration
Dimensions	Varies depending on display size and configuration