Garmin GPSMAP 620 - Configuring Active Track Options; Configuring the Numbers Screen

GPSMAP 620 Owner’s Manual 41
Marine Mode: Advanced Conguration
Navaid Size—adjusts the size of the symbols shown on the
map.
Navaid Type
—sets the navaid symbol set (NOAA or IALA).
Conguring the Active Track Options
From the Home screen, touch Information > User Data > Tracks
> Active Track Options.
Record Mode
—select Off, Fill, or Wrap
Off—does not record a track log.
Fill—records a track log until the track memory is full.
Wrap—continuously records the track log, replacing the oldest
track data with new data.
Interval
—dene the frequency at which the track is recorded.
Recording more-frequent plots is more accurate, but lls the track
log faster.
Interval
—set whether the interval is determined by distance,
time, or resolution. (Touch Change to set the quantity.)
Distance—record the track based on a distance between
points.
•
•
•
•
•
•
◦
Time—record the track based on a time interval.
Resolution
—record the track plot based on a variance from
your course. This setting is recommended for the most
efcient use of memory. The distance value (Change) is
the maximum error allowed from the true course before
recording a track point.
Change—set the value of the interval.
Track Color
—set the color of the track plot.
Conguring the Numbers Screen
From the Home screen, touch Dashboard > Numbers > Menu >
Congure.
1. Select the number of data elds you want to show on
the Numbers screen. The Numbers screen appears with
changeable data elds.
2. Touch the data eld you want to change.
3. Touch the data type you want to appear in the selected data
eld.
4. Repeat steps 3 and 4 until all the data elds contain the
information you want.
5. Touch
Done.
◦
◦
•