Garrett ACE series detector User Manual

3. Install the Upper Stem to the Lower Stem
and then this assembly to the ACE Control
Housing by depressing the two buttons and
coupling the Stem to the Housing unit.
Adjust for the most comfortable operating
length.
4. Wrap the Searchcoil cable snugly about the
stem with the first turn of the cable over the
stem.
ACE Assembly
1. Attach the Lower Stem to the Searchcoil by
first removing the paper liner from the two
mounting washers and inserting them into the
Stem (adhere to stem) then slip the
Searchcoil onto the Stem.
2.
Insert the Threaded Bolt through the holes of
the searchcoil and hand-tighten the two Knobs.
8
Garrett Metal Detectors
Ace 150 • Ace 250
9

Garrett ACE series detector Specifications

General

Brand	Garrett
Model	ACE series detector
Category	Metal Detector
Language	English