ACE 250 Controls
The ACE 250 includes these additional control functions
not found on the ACE 150:
1. DISCRIM Pushbutton - Use the (+) or (-) DISCRIM
pushbuttons to move the Target ID cursor to the left or
right. Next, use the ELIM Pushbutton to modify the
discrimination pattern on the Lower Scale.
19
Access and replace the batteries by gently sliding the
cover off the control housing. Remove batteries from the
ACE when the unit will be stored for longer than 30 days
(See Page 10).
8. Headphone Jack - ACE sport phones with 1/4” plug
can be inserted into the jack found on the reverse side of
the Control Housing.
9. Tone ID - The Tone ID feature produces distinct
audible tones based on a target’s conductivity:
• High conductivity targets (such as U.S. coins)
produce a unique belltone signal.
• Medium conductivity targets (such as jewelry,
nickels and international coins), produce a
standard-pitched audio signal.
• Low conductivity targets (such as iron and
nails) produce a low-pitch audio signal.
18
Garrett Metal Detectors
Ace 150 • Ace 250
To Next Page
Loading...
Need help?
General
