10
Z-Lynk Wireless Operation
Axiom features a built-in Z-Lynk wireless transmitter
which can be used with Garrett MS-3 wireless
headphones and any Z-Lynk enabled devices (such as
any other headphones connected to a Z-Lynk receiver).
A Z-Lynk Wireless headphone icon (see illustration)
on the LCD indicates the current status of your wireless
connection. A steady icon indicates the detector is
paired with an operating Z-Lynk receiver that is within
range. A flashing icon indicates that the detector is
searching for a receiver. Absence of the icon indicates
that Axiom’s wireless transmitter is switched off.
Pairing: To pair with a new set of headphones/
receiver, simply switch the headphone/receiver on,
hold within 2 feet (0.6 meters) of the Axiom. Next,
power on Axiom. Repeatedly press the MENU button
until the wireless icon is highlighted (as indicated
in this illustration). Press the (+) button to pair the
headphones.
Once paired, if the headphone/receiver is switched
off or moved out of range, Axiom will search and
attempt to reconnect to the receiver for 5 minutes,
indicated by a flashing icon. If the connection is not
reestablished during this time, Axiom will switch off its
wireless transmitter. To reconnect, simply switch the
Axiom off and then on again.
To unpair (forget) a set of headphones, simply press
the MENU button to select the wireless icon and then
use the (-) button to unpair.
Use of optional wired headphones: Axiom can
also be operated with any wired headphones that
have a 1/4” plug. For headphones with an 1/8” plug, an
optional adaptor is available from Garrett.
Note: Packages shipped with MS-3 headphones
include a user’s guide for full details on wireless
headphone operation.
Press MENU until the wireless icon is selected. Use Plus (+)
or Minus (-) button to pair or unpair headphones.
To Next Page
Loading...
Need help?
General
