107
www.gateway.com
3 Click Add. The Linksys Properties dialog box opens.
4 Type the name of the network in the Network name (SSID) box.
5 Click the arrow button to open the Network Authentication list, then click the network
authentication option you want.
6 If this is a security-enabled network, click the arrow button to open the Data encryption
list, then click WEP.
7 If the WEP network key is not provided automatically, click to clear The key is provided
for me automatically
check box, then type the network key settings in the Network key
and
Confirm network key boxes to match those set on the access point.
- OR -
If the WEP network key is provided automatically, then leave the check mark in
The
key is provided for me automatically
check box.
8 Make sure that the This is a computer-to-computer (ad hoc) network; wireless access points
are not used
check box is not selected.
9 Click OK to close the Wireless Network Properties dialog box. Your network should be
running. Go to “Testing your network” on page 111.
To Next Page
Loading...
