42
www.gateway.com
Inserting a memory card
To use a memory card:
1 Insert the memory card into the memory card slot as indicated in the previous table.
2 To access a file on the memory card, click Start, then click My Computer. Double-click
the drive letter (for example, the E: drive), then double-click the file name.
To remove a memory card:
■ Wait for the media reader activity indicator to stop blinking, then pull the media out
of the slot.
Caution To avoid memory card damage or errors while using a memory card,
insert only one memory card in a slot at a time.
Caution Do not remove the media or turn off the computer while the media
reader activity indicator is blinking. You could lose data. Also, remove
the media from the reader before you turn off the computer.
Important Do not use the remove hardware icon in the taskbar to remove
the memory card. If you use the remove hardware icon, your
computer will not recognize your memory card reader until you restart
the computer.
To Next Page
Loading...
Need help?
General
