58
www.gateway.com
Replacing the hard drive
Use this procedure to replace the hard drive. The photographs in this procedure show the
Profile 5. Although the cable connections for the Profile 5.5 are different, the procedure
is the same.
To replace the hard drive:
1 Open the case by following the instructions in “Opening the case” on page 56.
2 Press the drive cage release latch.
Tips & Tricks For more stability, place your computer face down to perform this
procedure. Avoid scratching the computer display by placing it on a
towel or other non-abrasive surface.
Warning Make sure that you removed all external cables and the power cord.
To Next Page
Loading...
